Material comparison
Compare what matters. Decide with context.
Evaluate representative polymer families across performance, processing, and application considerations.
Side-by-side analysis
Four materials. One decision surface.
Representative values support early exploration only. Final selection requires grade-specific technical data and testing.
| Property | PP | HDPE | PA6 | PA66 | Unit |
|---|---|---|---|---|---|
| Density | 0.90–0.91 | 0.94–0.97 | 1.12–1.14 | 1.13–1.15 | g/cm³ |
| Moisture absorption | Very low | Very low | Higher | Moderate | Relative |
| Heat resistance | Moderate | Moderate | High | Higher | Relative |
| Impact behavior | Balanced | High toughness | Good | Good | Relative |
| Typical process | Injection / Extrusion | Blow / Extrusion | Injection | Injection | — |
01
Use comparison to narrow the field. Processing conditions, regulations, product geometry, environment, and validation still determine the final grade.
START A MATERIAL CONVERSATION
Compare materials against your real requirements.
Share your application, performance targets, volume, and destination. STIT will help define the right path.